Directions
- Remove aftermarket hand grips or wood stocks, if possible, before cleaning.
- Place entire gun (field stripped) in Basket and place into tank 2/3 filled with Safety Ultrasonic Weapon Solution Concentrate (Non-Ammoniated #215), diluted 1:10 with water.
- Turn on and allow to cavitate 7-10 minutes.
- Rinse parts thoroughly under running water and drain. Shake parts and use compressed air to remove excess water.
- Place basket in pan containing ready-to-use Safety Ultrasonic Weapon Lubricating Solution (PC 212). The Lubricating pan should rest on side mounted handles. Be sure cleaning solution in tank comes in contact with bottom of lubricating pan at least 1⁄2 inch.
- Cavitate 7-10 minutes, lift out, drain, air dry. Do not use compressed air to try and speed drying as this will cause improper lubrication.
- Reassemble weapon and oil to manufacturer’s specifications.
Equipment Needed
Machines
- HCS 200
- Quantrex® 90 w/Timer
- Quantrex® 90 w/Timer & Heat
- Quantrex® 140 w/Timer & Drain
- Quantrex® 140 w/Timer, Heat & Drain
- Quantrex® 210 w/Timer & Drain
- Quantrex® 210 w/Timer, Heat & Drain
- Quantrex® 310 w/Timer & Drain
- Quantrex® 360 w/Timer & Drain
- Quantrex® 360 w/Timer, Heat & Drain
- Quantrex® 650 w/Timer & Drain
- Quantrex® 650 w/Timer, Heat & Drain