Directions
- Half fill your ultrasonic machine with #677 Ultrasonic Non-ammoniated Clock Cleaning Solution. Place timing mechanisms (minus dust covers) in tank with barrel opening up.
- Cavitate 3-5 minutes.
- Remove timer and drain with barrel opening down. DO NOT ALLOW SOLUTION TO DRY.
- Place timer into Auxiliary Pan containing Ultrasonic Watch Rinsing Solution 1/2 full, barrel opening up and place pan on top of Ultrasonic Machine.
- Cavitate 3-5 minutes. Drain as above.
- Place into Auxiliary Pan of Clock Lube.
- Cavitate 3-5 minutes. Drain as above.
- Air dry with L&R Jewelry Dryer, barrel opening down. DO NOT ALLOW EXCESS HEAT TO WARP HAIRSPRING. Mechanism is now completely clean and lubricated.