Directions
- Fill the tank of the Quantrex 2/3 with water. Remove cap from unit, close chamber of UltraDose Germicidal and gently squeeze bottle filling to 1⁄2 oz. line. Pour into tank.
- Degas for 5 minutes.
- Place handcuffs in the accessory basket and put in tank. For best results leave handcuffs in the open position.
- Place cover on top and turn unit on. Set timer for a 10 minute cleaning cycle.
- Once cleaning cycle is complete, remove the basket and rinse the cuffs while in the basket under tap water. Shake off any residual water left on the cuffs.
- Spray handcuffs with Barrier Milk Ready to Use Spray to lubricate and prevent rust. Special attention should be given to joints and locking mechanism.
- Wipe with dry cloth.
Equipment Needed
Machines
- HCS 200
- Quantrex® 140 w/Timer & Drain
- Quantrex® 140 w/Timer, Heat & Drain
- Quantrex® 210 w/Timer & Drain
- Quantrex® 210 w/Timer, Heat & Drain
- Quantrex® 310 w/Timer & Drain
- Quantrex® 360 w/Timer & Drain
- Quantrex® 360 w/Timer, Heat & Drain
- Quantrex® 650 w/Timer & Drain
- Quantrex® 650 w/Timer, Heat & Drain