Directions for Use

• This product is a concentrate.  Dilute 1 part solution with 12 parts water.  Can be diluted with up to 33 parts water. 
• Use directly in an ultrasonic cleaner.
• To clean, place parts in accessory basket.  Insert basket into ultrasonic tank filled 2/3 full with properly diluted PrepClean Buffing Compound Remover. 
• Operate ultrasonic cleaner for 5-10 minutes depending on volume and amount of contaminant to be removed.  Normal operating temperature is 130°F (54°C). 
• After cleaning, rinse thoroughly under running water. 
• DO NOT USE ON ALUMINUM.